Издательство: | Книга по требованию |
Дата выхода: | июль 2011 |
ISBN: | 978-6-1302-9277-5 |
Объём: | 240 страниц |
Масса: | 387 г |
Размеры(В x Ш x Т), см: | 23 x 16 x 2 |
Creep is the tendency of a solid material to slowly move or deform permanently under the influence of stresses. It occurs as a result of long term exposure to levels of stress that are below the yield strength of the material. Creep is more severe in materials that are subjected to heat for long periods, and near the melting point. Creep always increases with temperature. The rate of this deformation is a function of the material properties, exposure time, exposure temperature and the applied structural load. Depending on the magnitude of the applied stress and its duration, the deformation may become so large that a component can no longer perform its function — for example creep of a turbine blade will cause the blade to contact the casing, resulting in the failure of the blade.
Данное издание не является оригинальным. Книга печатается по технологии принт-он-деманд после получения заказа.